Timber External Water Softener Cabinet

A Timber (treated marine plywood) Water Softener Cabinet is great if you need to site your Water Softener outside.

Your Water Softener must be protected against the elements, especially from freezing conditions.

The cabinets are supplied flat packed for easy assembly and comes fully insulated, however hoses must be lagged. Install only on a heated wall (not the other side of a garage). The lid is hinged allowing for easy access to refill salt tank. No need to pull the cabinet away from the wall. This cabinet has no base. 

It is important that the frame with the cabinet is screwed to the wall to prevent the wind from blowing around the back of the cabinet and freezing the pipework.

Timber Cabinet Dimensions:

Internal Dimensions - H 505mm x W 515mm x D 380mm
External Dimensions - H 540mm x W 620mm x D 440mm

Timber requires treating following installation. We recommend that your cabinet is re-treated every 2-3 years dependent on the location and exposure to the elements

The brackets still need to be screwed to the wall. Install only on a heated wall (not the other side of a garage).

PLEASE DOUBLE CHECK YOUR SIZES TO AVOID RETURNS.