Swan Large Metered Water Softener

Swan Large Metered Water Softener - high capacity up to 5800 litres

£673.31
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Description

The Swan Large Metered Water Softener provides up to 4200 litres (4.2 m3) to 5800 litres (5.8 m3) of softened water per day, based on 300 ppm hardness. 


From a conventional system to the modern un-vented systems the Swan CW25 Water Softener,  with the excellent Clack valve with 1" connections.

  CW25 CW30 CW35
Inlet/Outlet 1" 1" 1"
Designed Flow rate 1 m3/hr 1.2 m3/hr 1.4 m3/hr
Max Flow Rate 6.1 m3/hr 6.1 m3/hr 6.1 m3/hr
Bar Pressure 1.5 - 8  1.5 - 8 1.5 - 8
Salt used per regeneration 3.7kg 4.5kg 5.2 kg
Capacity 4200 litres 5000 litres 5800 litres



Use the dropdown bar above to select the softener and discounted install kit.

An integrated Salt Alarm is available on request at an additional cost.

A full range of installation kits available to suit all pipework.

High quality British design and manufacture.

Dimensions: 1190mm H x 520mm D x 325mm W

 Swan Brochure 

 Swan Installation Instructions


WHICH INSTALLATION KIT?

It is important that you select the correct installation kit to suit your pipework and hot water system in your property. This avoids any chance of the incorrect installation kit from restricting through the water softener and therefore within your property.

In U.K homes, generally there are three sizes of pipework measurements, all are the diameter across the pipe and they are 15mm, 22mm & 28mm. Generally Water softeners are installed near where the water enters your property, so please measure the pipework above the main isolation valve.

If you have 15mm pipework and a conventional gravity fed, or indirect, system which has a cold water tank in the loft space and hot water cylinder, then our standard  15mm installation kit would be suitable. We offer two lengths of flexible hose to go between your fixed pipework and the water softener, either 1000mm or 1500mm long.

If you are still on 15 mm pipework but have a combination boiler, or direct type system, then you are better to go with the 15mm High Flow installation kit. This has the benefit of using uprated fittings and connection hoses and ensures that you get full flow through everything and therefore get no restriction on flow to and from  your water softener. We offer two lengths of flexible hose to go between your fixed pipework and the water softener, either 800mm or 1000mm long.

If you have 22mm pipework, then the best choice is one of our 22mm install kits. This is found in nearly all houses built since year 2000 and are generally used on feeding mains fed unvented hot water systems. We offer these kits with either 800mm or 1000mm long flexible connection hoses.

In larger properties then we offer a 28mm installation kit for use with suitable Water softeners where the connection pipework is 28mm diameter. We offer two lengths of flexible hose to go between your fixed pipework and the water softener, either 800mm or 1000mm long.

If you are unsure about any of the install kit choices, then please call us on 0845 10 80 685 or email for clarificatio

Warranty
GUARANTEES AND SERVICE The owner of a Fountain Softeners water softener is protected by the following guarantees, which include the right to exchange or repair in the case of a manufacturer’s defect for up to: 5 Years Parts 3 Years Labour The guarantees are under condition that the softener is installed according to local regulations and to the manufacturer’s instructions as well as the following: 1) It is very important that the water temperature of 50 centigrade for CW Series (cold water)and 65 degrees for HW Series (hot water) is never exceeded. 2) There must always be suitable salt in the brine tank. 3) The electrical supply must never be switched off – electric units only 4) After a current break the electro timer must be re-adjusted (timer models only) 5) The inlet and outlet valves must always be open. The by-pass valve must always be closed. 6) The unit should be serviced every two years and is a condition of the 3 year extended parts warranty. 7) If irregularities should occur, you would need to:- Switch off the current Close the inlet and outlet valves Open the by-pass valve Phone Fountain Softeners